Logitech G27 Settings

Need help with anything...post here.
Post Reply
User avatar
JeremyJeffries
RTG Staff Member
Posts: 1170
Joined: November 14th, 2020, 8:02 pm
Car#: 1

Logitech G27 Settings

Post by JeremyJeffries »

Thanks to Alex M/Pack for sharing his wheel settings below:

Logitech Profiler Settings ( I have a G27 wheel )

Apply persistent profile > Choose persistent Profile > NASCAR Racing 2003 Season

Steering Wheel/Axis Properties
Sensitivity = 50%
Dead Zone = 0%
Range = 100%

Accelerator/Axis Properties
Sensitivity = 55%
Dead Zone = 0%
Range = 100%

Brake/Axis Properties
Sensitivity = 50%
Dead Zone = 0%
Range = 100%

Options/Global Device settings
Overall Effects Strength = 105%
Spring Effect Strength = 0%
Damper Effect Strength = 0%
Enable Centering Spring in Force Feedback Games = Checked
Centering Spring Strength = 150% ( I don’t mind a stiffer wheel )
Report Combined Pedals = Unchecked
Degrees of Rotation = 253°
Allow Game to Adjust Settings = Checked

NR2003 In-Game Settings

Options/Controls

Force Feedback
Strength = 40%
Damping = 0%
Latency = 0%

Driver Aids
Anti-Lock Brakes = OFF
Automatic Shifting = OFF
Automatic Clutch = ON
Traction Control = OFF
Stability Control = OFF
Ideal Race Line = ON ( at 2mile or less tracks )

Options/Controls/Advanced
Input Momentum
Steering = 0%
Throttle = 1%
Brake = 5%
Steering Assistance = 0% or 1% (10% at SSW’s)
Steering Linearity = 70%
Boost Steering at Low speeds = Checked
Use any key for driving input = Checked
Steering Ratio: Depends on the track, CUP or CTS physics, and the setup. I usually run more than 24:1. I’ve always preferred higher ratios which requires turning the wheel more. Lower ratios (16:1-22:1) at short tracks. Alot of high ratios in CTS physics (28:1-32:1), or if the setup feels twitchy.
Post Reply

Return to “Technical Help”